Air Hose for Air Coat Spray Gun
Create the low pressure air pattern to control high pressure paint flow
Air hose for manual spray gun and automatic spray gun is significant different. It can not be used the same type. Please see the information summary on below;
-
Air Hose for Manual Spray Gun Use the same air hose type as manual air spray gun. This hose feed air pressure in order to create low air pressure. The air will be transferred from hose to air cap and make spray pattern. The recommend size of air hose should be 6.5 X 9.5 MM.
-
Air Hose for Automatic Spray Gun It is totally different from manual spray gun whether the application and hose size. Air hose transfer air pressure into 2 section. Firstly, atomize air section to create spray pattern. Secondly, control air section in order to operate or stop the spray gun. (The control air section is appear in automatic spray gun only and the outer diameter of hose size must 6MM and 8MM and also can be installed within machine-built by order. Please see more information on below;

Air Hose and Fitting for AirCoat Manual Spray Gun
Hakko E - AFC-6.5 Air Hose
Feature of Hakko E-AFC (Data Summary):
The blue air hose which is built from polyurethane and inner surface with conductive polyurethane for prevent the electrostatic
Hakko E-AFC Application for hose set:
Only 1 hose size is Hakko E-AFC I.D. 6.5 mm x O.D. 8.9 mm for all type of hose set. (Please click "More Details" for further information)

Fitting E-FBG-6.5
E-FBG-6.5-G1/4
Details of Fitting:
Compatible with transfer hose at I.D. 6.5 mm x O.D. 9.5 MM so it is available for E-SV-6.5 and E-AFC-6.5 for
Please click on below link for further information

Air Hose for Automatic Spray Gun
Position of Air Hose for Automatic Spray Gun
We review the position of air hose installation for GA4000AC again because the air hose application is significant different from manual type. Please see the position on spray gun both ACIA (Pattern adjustment on spray gun) and ACEC (Pattern adjustment from outside spray gun).
Air Hose Application for GA4000ACIC (Pattern Adjustment on Spray Gun)
.png)
.png)
Position of Paint Hose and Air Hose
(GA4000ACIC)
-
CA: 6MM air hose for control Air section (turn on/off spray gun operation)
-
AA: 8MM air hose for atomizing air section (paint atomizing)
-
M: Paint Inlet G1/4
Suggestion of Air Hose Installation
Air hose for control air and atomizing air should be used in the different hose color in order to make installation to be more convenient.
GA4000ACIC R Type
(Hose Installation on Rear)
GA4000ACIC S Type
(Hose Installation on Side)
Air Hose Application for GA4000ACEC (Pattern Adjustment outside spray gun)
.png)
GA4000ACEC R Type
(Hose Installation on Rear)
.png)
Position of Paint Hose and Air Hose
(GA4000ACEC)
-
CA: 6MM air hose for control Air section (turn on/off spray gun operation)
-
AA: 8MM air hose for atomizing air section (paint atomizing)
-
SA: 6MM air hose for pattern adjustment air section
-
M: Paint Inlet G1/4 (Both 2 Position)
Suggestion of Air Hose Installation
Air hose for control air and atomizing air should be used in the different hose color in order to make installation to be more convenient.
GA4000ACEC S Type
(Hose Installation on Side)