W2KIT55UK_2.jpg

ไทย

Thailand.png

Spray Gun Maintenance Kit

Maintenance Kit for extending the service life

W2KIT55UK.jpg

1. Accepted Maintenance Kit

Standard from genuine spray gun manufacturer

The service maintenance is the significant point of extension useful life of spray gun and keep spray gun to be operated with full performance throughout the lifetime. In other hand, the matter which is significant equally with service maintenance that it is a standard tool kit because the damage is not occur from operating only but it might be happen from using a wrong tools kit which is not suitable and may make a lot of damage than you think.

2. Prevent the damage

The damage from unappropriated service maintenance

The damage might be happen cumulatively from use non-standard of brush, cleaning liquid and needle. Therefore, the spray gun will be damaged and unable to use anymore. The ANEST IWATA maintenance kit guarantee the safety of equipment.

3. One set can take care all

With various type of tools for all body of spray gun

The tools kit within maintenance kit is built for spray gun maintenance only so the brush and needle for cleaning is sufficient for service maintenance.

List of tools kit in W2KIT55UK maintenance set

Brush.png

1. Big surface Brushes

D-5.png

2. Flat Brush

Brush 15 mm.png

3. Big Twisted brush

Brush 10 mm.png

4. Twisted brush

D-3.png

5. Tiny Twisted brush

D-2.png

6. Cleaning Needle 12 Pcs

Lubricant.png

7. Premier Maintenance Grease

How to use W2KIT55UK service kit?

1. Disassembly the related part with spray pattern.

1.1

A-1.png

1.2

A-2.png

1.3

A-3.png

1.4

A-4.png

Take out fluid adjustment knob and needle spring

and also needle as well

Take off the air cap

Unscrew fluid nozzle with spanner wrench

2. Cleaning the paint passage way with brush

2.1

B-1.png

2.2

B-2.png

2.3

B-3.png

2.4

B-4.png

Clean the material passage with brush

Clean the material passage with brush

Clean the body surface

Dry with air duster gun

3. Cleaning the related part with nozzle

3.1

C-1.png

3.2

C-2.png

3.3

C-3.png

3.4

C-4.png

Clean small holes on the fluid nozzle with a special tiny brush

and clean also nozzle orifice

Clean tip of the nozzle carefully with brush

Clean also thread of the nozzle carefully with brush

3.5

C-5.png

Clean the fluid nozzle internally with the correct size brush

4. Cleaning the related part with air cap

4.1

D-1.png

4.2

D-2.png

4.3

D-3.png

4.4

D-4.png

Clean the air cap center hole

Clean tiny holes with needle

Clean horn holes with special tiny brush

and the back side as well

4.5

D-5.png

Clean needle

5. Re-Assembly the part of spray gun

5.1

E-1.png

5.2

E-2.png

5.3

E-3.png

5.4

E-4.png

Assemble fluid nozzle

Tighten up the fluid nozzle with spanner wrench

Assemble the air cap and hand-tighten it.

Grease the needle

5.5

E-5.png

5.6

G-6.png

5.7

E-7.png

5.8

E-8.png

Insert the needle

Grease the fluid adj. knob screw.

Grease the needle spring

Grease the air valve bar behind the trigger

5.9

E-9.png

Adjust (15-60 degree tighten) needle packing with spanner universal

5.10

E-10.png

Check the trigger and needle travel smoothly

Request

Quotation and Order

Back to

Automotive Refinishing