Related Accessories

Paint Hose Air Hose and Gun Cable for GA5000EA



Because the electrostatic automatic spray gun will not include the hose set so it is required to purchase separately following below suggested item;

1. Paint Hose for Electrostatic Automatic Spray Gun

Feature of Hakko E-SV (Data Summary):

Liquid hose transfer for solvent-based material which is built from 3 layers of surface and include ground line (black line) that it is the conductive polyurethane to transfer to electrostatic into ground cable

Hakko E-SV Application for hose:

Every type of hose package use the same inside diameter of paint hose as 6.5MM so the E-SV-6.5 can be applied every length of hose start from 7.5M 10M 15M and 20M

(Please click "More Details" for further information)

2. Air Hose for Electrostatic Automatic Spray Gun

The Air hose for automatic spray gun which determine the 3 size of air hose are following as below;

  • Red Air Hose D6 for Air Control

  • Blue Air Hose D10 for Air Atomizing

  • Green Air Hose D8 for Air Spray Pattern or Shaping Air (In case of pattern adjusting from external or EC)


As there have the 3 color of air hose, it support a user to be able to separate the duty of each hose and understand clearly when make the installation of spray gun. They will know exactly the kind of air pressure in each hose. Once they found a problem of air feeding, they can find easily the error point in air hose and support to make investigating quickly. The air hose for spray gun must be high performance, more flexible and resist the bending because it must be used in automatic system and also use the standard material.



The hose color support the separating the duty of air pressure and determine the position of air hose. You can selcect an another color of air hose following your demand or you can use clear color air hose for this case.

3. Gun Cable GM5000E for electrostatic automatic spray gun

Details of Gun Cable:

The standard gun cable of WAGNER for connect the signal and transfer data between spray gun GA5000EA, GA5000EAC and EPG5000 control unit. There have 4 length size are following as below;

Code 2339157 GM5000E Gun Cable 10M

Code 2339158 GM5000E Gun Cable 15M

Code 2339159 GM5000E Gun Cable 20M

Code 2339160 GM5000E Gun Cable 25M

4. Fitting for Paint Hose


Details of Fitting:

Compatible with transfer hose at I.D. 6.5 mm x O.D. 9.5 MM so it is available for E-SV-6.5. Please click on below link for further information

2. Spiral Hose for low resistant paint

Spiral Hose:


The special hose for low resistant paint. Especially, it is used for metallic painting.

As the large particle paint such as metallic has high conductive rate so the paint resistant is low rate and electrode can not add electric charge into paint with full performance. the solution is using the spiral tube that it extent the length to be 216 mm and the spiral will interrupt the conductive bridge by sedimentation of the metallic particle. Therefore, the particle mass will be reduce and electric charge can be added into liquid metallic.


And the this spiral tube can use together with standard hose set. That why's there is not electrostatic sprahy gun LowR series in our inventory.

Warning: Even this spiral tube can use with low resistant paint but if the main spray gun is GA5000EA, it still can not use with water-based paint.

Spiral Hose

Code: 2355046

3. Compatible Electrostatic Spray Gun for this hose

Electrostatic Gun


Air Spray

Products Division
After Sales Service
About R.O.M.
Social Network Channel
เกี่ยวกับ R.O.M.
Please click the title on above for short-cut way to each information page
โปรดคลิ๊กหัวข้อด้านบนสำหรับทางลัดไปยังข้อมูลต่าง ๆ ในแต่ละหน้า

© 2020 R.O.M. INTERTRADE Limited Partnership The Authorized WAGNER Group Product Distributor in Thailand since 1988.

© 2563 ห้างหุ้นส่วนจำกัด อาร์.โอ.เอ็ม. อินเตอร์เทรด ตัวแทนจำหน่ายสินค้าในเครือ WAGNER อย่างเป็นทางการในประเทศไทย ตั้งแต่ พ.ศ. 2531


สินค้าในเครือ WAGNER Group/Product under WAGNER Group






The ANEST IWATA official distributor for Thailand territory since 2016.

ผู้แทนจำหน่ายสินค้า ANEST IWATA อย่างเป็นทางการ ตั้งแต่ปี พ.ศ. 2559

The Hakko official distributor for Thailand territory since 2017

(Under Authorized Assigned by Bando Manufacturing Co.,Ltd)

ผู้จัดจำหน่ายสินค้า Hakko อย่างเป็นทางการในประเทศไทย ตั้งแต่ปี พ.ศ. 2560

(ภายใต้การแต่งตั้งตัวแทนจำหน่ายโดย บจก. แบนโด แมนูแฟคเจอริ่ง)

Distributor of Spray Equipment for Industry Factory, Car Refinish, Construction Project, Consumer Level and Arts

ผู้จำหน่ายอุปกรณ์พ่นสีสำหรับโรงงานอุตสหกรรม, งานพ่นสีในอู่รถยนต์, งานก่อสร้าง งานระดับครัวเรือนและงานศิลปะ