Electrostatic Spray Gun with automatic type

​

The original WAGNER electrostatic spray gun manual type is designed for user friendly that user may feel comfortable when handle to use, it is also lightweight, efficiency and robust throughout until the end of useful life. Currently, WAGNER present the 2 types of electrostatic spray gun which are air spray type and air coat type (air-mix which combine between high pressure and low air pressure) for large workpiece and use a few time for operation. Whether air spray or air coat, the main purpose of electrostatic spray gun is material-saving inn a significant amount. 

 

Solvent-Based for Electrostatic Spray Gun

 

The solvent-based which is required to use with electrostatic spray gun is 150 kiloOhm because the charge particle can be added into solvent-based liquid and can bring material into wrap efficiently around the workpiece. The list of liquid material are following as below;

​

• 1K Paint (Single Component liquid which be mixed with solvent material)

• 2K Paint (Two component which include main material and hardener. If 2K is required, the painting system must have system and equipment which is enable to use for 2K mixing)

• Solvent-based paint at low, middle and high viscosity.

• Release Agent

• Lacquer for clear coating (Top Coat Paint)

• UV Paint (The application must be used under instruction of UV paint manufacturer because the reaction of light)

• ​

• However, this spray gun can be applied with material which has high conductive value or large particle paint but it is required to set up with additional accessories that is spiral tube in order to charge electric into liquid. The following of liquid material are following as below;

• ​

• Metallic Paint (Powder metal within liquid)

• Large Particle Paint

• ​

• The details of spiral tube will be explained with deep details in technical data of GA5000EA. In facts, this spray gun is designed for solvent-based only. Do not use with water-based paint.