ไทย 

FLEX CONTROL SMART

Mixing Equipment with Computer System

 

2K Mixing Technology which using advance computer system to precisely and constantly provide the mixing ratio according to setting up value. Decreasing the waste consumption rate. All data and information of operating will be saved and can transfer to computer desktop and include flushing function to automatically clean the system itself that it work faster.

 

The control panel has four main buttons for easier operation and easy maintenance. Two paint capacity sensors are available to meet the exacting requirements for the best mix ratio.

Basic Structure Flex Control Samart

4 Mains Control Button

Touch screen Display has menu for setting recipe and system configurator.

USB Connection for data upload and dowload

High performance valves enable use with up to five paints and  two hardeners.

The valve controller for the parallel use of two independent guns.

Mounting Trolley support the simply moving and guarantee the robust  material and long life use.

Operating Control Section

Fluid Section

Smart System Control

Simple Main Control Button

Four buttons for the painter consist of “start”, “stop”, “flush” and “change a recipe” then just operate.

Independent Cleaning

The gun distributor valve is enable to use with 2 guns. A gun can be cleaned while the other remains operate in the same time for flexibility using.

Touch Screen

Adjust the parameter, mixing recipes with a touch screen that facilitates the operator.

Simply Maintenance

Due to the open all components layout. Filters can be changed with very little assembly work.

Monitoring and Transfer Data

Enable to save mixing recipe, length of use and consumption materials in order to evaluate and conclude operation. It can be transferred with a USB flash drive for save and evaluate on PC desktop.

High Voltage Release

For higher security, a relay dependably controls the communication with electrostatic with an automatic release of the high voltage.

Maximum Efficiency and performance

The extension options allows the use of up to five paints and two hardeners.

Applicable with Robot

Flex Control smart will applicate with robot by transmit data to the robot such as operational readiness alarm signals and etc.

Optimal Pressure

Compatible with low pressure applications because there is no pressure loss due to special low pressure valves.

3K Component Mixing System

There is also a WAGNER FlexControl Smart 3 component mixing system.

Adaptive Injection System

B (Hardener) Injection without regulation of the dispensing system's stroke

Equipment provide precisely the dispensing.

Adaptive Injection System or “AIA” is the system which fully automatically controls the dispensing valves stroke. The injection of hardener or “B” components are injected by AIS which has a soft rhythms stroke and almost without interruptions. It make B component to be injected with homogeneous material.

 

In case of changing in material deliver flow rate, recipe and different number of guns. The dispensing system will adapt automatically to find the optimal mixing ratio.

 

AIS support to feed precisely material and keep continuously coating quality.

B (Hardener) injection with AIS

2 Measurement System

Flow Stroke Measurement

 

Flex Control Smart provide 2 stroke measurements which consist of direct material flow measurement and indirect material flow measurement. For indirect measurement, it guarantees the accuracy of measurement, low discrepancy rate and suitable for using with high density material which make sensors to be quick wearing.

Gear Flow Meter

Gear Flow Meter

 

  • Direct measurement in material flow - suitable for non-abrasive materials.

  • Fast Reaction time.

  • Can be used for ring paint supply systems.

  • A measuring system for up to 5 paints

Operating Position

 

  1. A Pump feed material to flex control smart system.

  2. B Pump feed hardener to flex control smart system.

  3. A Component (Material) flow pass through a gear flow meter.

  4. B Component (Hardener) flow pass through a gear flow meter.

  5. Gear flow meter measure the flow of mixing material and transmit data to control cabinet.

  6. Control cabinet obtain and process data.

Stroke Sensor Meter

WAGNER Stroke Sensor

 

  • Indirect flow measurement without material contact.

  • No wear when using abrasive materials.

  • No risk of incorrect measurements with low-viscosity material.

  • High dosing accuracy with frequent opening and closing of the gun(s).

Operating Position

 

  1. A Pump feed material to flex control smart system.

  2. B Pump feed hardener to flex control smart system.

  3. Stroke sensor attach on piston pump measure the flow of material and hardener with magnetic to check the movement of piston in pump.

  4. Stroke sensor transmit data to control cabinet. Due the stroke sensor are installed outside pump. Therefore, it will not contact material and no faster wearing.

  5. Control cabinet obtain and process data.

Flex Control Smart's Software

Setting Up on Computer

 

As the configuration system can be transferred between Control cabinet and computer. So it is enable to set up on computer desktop to facilitate and using data to perform analysis, processing and evaluating and then transfer back to control cabinet. 

The advantages of SmartData:

 

  1. Convenient setting and analysis of parameters and recipes via an external PC

  2. Clear presentation of all parameters to be entered

  3. No interruption of production necessary as changes to the system settings can also be undertaken offline.

 

Consumption Volumes Saving

 

The consumption volumes of paint (A), hardener (B) ,additional paint (C) components, solvent for flushing, consumption rate, job totals and alarms are automatically saved.

 

Technical Data

Flex Control which attach AIS

Back to

2K Mixing Unit

Request

Quotation and Order

Products Division
กลุ่มสินค้า
After Sales Service
About R.O.M.
Social Network Channel
การบริการหลังการขาย
เกี่ยวกับ R.O.M.
Please click the title on above for short-cut way to each information page
โปรดคลิ๊กหัวข้อด้านบนสำหรับทางลัดไปยังข้อมูลต่าง ๆ ในแต่ละหน้า

© 2018 R.O.M. INTERTRADE Limited Partnership The Authorized WAGNER Group Product Distributor in Thailand since 1988.

© 2561 ห้างหุ้นส่วนจำกัด อาร์.โอ.เอ็ม. อินเตอร์เทรด ตัวแทนจำหน่ายสินค้าในเครือ WAGNER อย่างเป็นทางการในประเทศไทย ตั้งแต่ พ.ศ. 2531

 

สินค้าในเครือ WAGNER Group/Product under WAGNER Group

 

- WAGNER

- WALTHER PILOT

- TITAN

 

The ANEST IWATA official distributor for Thailand territory since 2016.

ผู้แทนจำหน่ายสินค้า ANEST IWATA อย่างเป็นทางการ ตั้งแต่ปี พ.ศ. 2559

Distributor of Spray Equipment for Industry Factory, Car Refinish, Construction Project, Consumer Level and Arts

ผู้จำหน่ายอุปกรณ์พ่นสีสำหรับโรงงานอุตสหกรรม, งานพ่นสีในอู่รถยนต์, งานก่อสร้าง งานระดับครัวเรือนและงานศิลปะ