High Pressure Hose (Industry Coating Section)

ไทย 

Thailand.png

Paint hose for pressure resistant up to 250 Bar

High Pressure Hose for airless spray gun and aircoat spray is the same model. The characteristic of high pressure hose is following below;

  • It must be available for lacquer, hardener, solvent-based liquid, release agent and high corrosion material.

  • The hose material must be made rom PTFE and FEP which is high ability for chemical resistant. In case of other material type, the performance of material. must equivalent.

  • The pressure resistivity must be able more than 230 Bar

  • The hose must be used for whole length and it can not be separated into sell in small length.

  • The suitable inside diameter of hose must be 4 mm or more. Bigger size is depended on situation.

In addition, using high pressure hose for manual spray gun (Vector Pro or GM4700) and automatic spray gun (GA400AL or GA4000AC) is quite different so there have various size of hose for cover the all kind of application.

9984_506_Hochdruckschlauch_Freisteller.j

High Pressure Hose for Manual Spray Gun

PIC_APP_Foerdern_004.jpg

Apply with Airless Spray Gun

PIC_APP_Applizieren_057.jpg

Apply with AirCoat Spray Gun

High Pressure for Manual Spray Gun

Standard hose from WAGNER which has standard size and connect with manual spray gun such as VECTOR PRO, AG-14, PROTEC-GM1 and GM4700 but it need to check the size of fitting of each spray gun. However, the size of HP hose for airless and aircoat are different. We separate into each section following below;

Recommend High Pressure Hose for Airless Spray Gun

The regular size is start from 15M and separate the inner diameter size and fitting size which is depend on VECTOR Pro and AG-14

  • Inner Diameter DN 6 Fitting 1/4" NPSM Pressure Resistant 270 Bar Length 15M

  • Inner Diameter DN 6 Fitting 1/4" NPS Pressure Resistant 530 Bar Length 10M

  • Inner Diameter DN 10 Fitting NPSM 3/8" Pressure Resistant 250 Bar Length 15M

  • Inner Diameter DN 10 Fitting NPS 3/8" Pressure Resistant 530 Bar Length 15M

  • Inner Diameter DN 13 Fitting NPS 1/2" Pressure Resistant 230 Bar Length 15M

Actually, the DN4 and Length 7.5M is enable to use with airless spray gun without problem which is depended on working site.

Vector Pro_vr.jpg

Airless Spray Gun

Recommend High Pressure Hose for AirCoat Spray Gun

Even the high pressure hose is the same unit of airless spray gun but the inside diameter may not more than 6 MM (refer to instruction manual). The length start from 7.5M and not more than 20M because the application is different.

  • Inner Diameter DN 4 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 7.5M

  • Inner Diameter DN 4 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 10M

  • Inner Diameter DN 4 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 15M

  • Inner Diameter DN 4 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 20M

GM4700.jpg

AirCoat Spray Gun

High Pressure Hose for Automatic Spray Gun

PIC_APP_Applizieren_039.jpg

Apply with airless spray gun

PIC_APP_Applizieren_059.jpg

Apply with aircoat spray gun

High Pressure Hose for Automatic Spray Gun

Because the installation of automatic spray gun is flexible and depend on working site specification of each painting place, the length and diameter size is always different in significant, standard hose of WAGNER provide more hose size with following below;

High Pressure Hose for Airless Automatic Spray Gun

The hose is the same as hose for manual spray gun but there also has the length which is shorter than 15M. (For 15M, you can use the same unit of manual spray gun.

  • Inner Diameter DN 4 Fitting 1/4" NPSM Pressure Resistant 270 Bar Length 10M

  • Inner Diameter DN 6 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 5M

  • Inner Diameter DN 10 Fitting NPS 3/8" Pressure Resistant 530 Bar Length 10M

GA400AL.jpg

Airless Spray Gun

High Pressure Hose for AirCoat Automatic Spray Gun

GA4000AC is installed in machine, especially, CNC machine and other type of machine that each machine is different size and dimension so they provide many types of paint hose.

  • Inner Diameter DN 4 Fitting M16x1.5 Pressure Resistant 270 Bar Length 1 M

  • Inner Diameter DN 4 Fitting M16x1.5 Pressure Resistant 270 Bar Length 7.5 M

  • Inner Diameter DN 4 Fitting NPSM1/4" Pressure Resistant 270 bar Length 7.5 M

  • Inner Diameter DN 6 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 1 M

  • Inner Diameter DN 6 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 2.5 M

  • Inner Diameter DN 6 Fitting 1/4" NPS Pressure Resistant 270 Bar Length 5 M

  • Inner Diameter DN 6 Fitting M16x1.5 Pressure Resistant 270 Bar Length 15 M

Wagner-GA-4000AC.jpg

AirCoat Spray Gun

Applicable Spray Gun for this hose

Airless Gun_AG 14_mSchatten.jpg

Airless Spray Gun

VECTOR PRO

AG-14

PROTEC GM1

GM4700.jpg

AirCoat Spray Gun

GM4700

PIC_EQU_GA400AL.jpg

Airless Spray Gun

Automatic Type

GA400AL

PIC_EQU_GA4000ACIC-holder.jpg

AirCoat Spray Gun

Automatic Type

GA4000AC