IWATA CUSTOM MICRON (Ver.2)

The flagship level of IWATA Airbrush. Made for Elite Professional

ไทย 

For the elite professional who demands precise and accurate control of very detailed spraying, the Custom Micron series is built to be the "best of the best", hand-tested and adjusted by the world's leading airbrush technicians. Special machining processes along with the meticulous hand-fitting of the parts create an airbrush with superb atomization and incredible control. By removing the crown cap and nozzle cap, these airbrushes will spray an entire range of stipple effects, from very fine to coarse textures.

Ergonomic trigger prevents finger fatigue

Never lose your crown cap again with the crown cap dock

1

2

3

4

5

Custom Micron Head Component

Custom Micron Fluid Head System

The unique feature of the hand-matched head system means all of the parts in the head are assembled, tested and adjusted until the spray characteristic are as perfect as an airbrush can be. Available only as a set, spare head systems can be purchased to ensure the Custom Micron will always spray to its fullest potential.

Fluid Head System Component

  1. Needle Crown Cap

  2. Nozzle Cap

  3. Nozzle

  4. Nozzle Base

  5. Fluid Head System Completed Set which is assembled from item No. 1 to item No. 4.

Feature of Custom Micron in each type

IWATA Custom Micron CM-C Plus Version 2

Feature​

  • Using the same matched-head assembly as the other trusted Custom Micron airbrushes, the Custom Micron CM-C Plus has the same precise feel that's entirely unique to a Custom Micron airbrush (0.23 mm and 0.18 mm nozzle)

  • A breakthrough technology, the Micro Air Control (MAC) valve enables infinite control of the airflow at the head of the airbrush, which provides even more control of stippling, fine details and finely atomized background spraying.

  • The solvent-proof PTFE needle packing allows for the use of automotive or other solvent-based paints.

  • The funnel shape of the redesigned gravity-feed cup 6 ml lets the airbrush be used effectively with only a couple drops of paint, ensuring a fast and through clean up.

  • A cutaway handle enables users to grab the needle-chucking nut and quickly pull back the needle to flush paint out of the cup and paint passageways for a quick and easy clean up.

  • The trigger is dual-action and provide spray width pattern at 20 mm (depend on distance between crown cap and object surface.

IWATA Custom Micron CM-C Version 2

Feature

  • Ideal for professional use where heavier paints are required (0.23 mm nozzle) or when larger work is being created.

  • The Iwata Custom Micron matched-head system ensures superior atomization.

  • Features a larger 9.0 ml gravity-feed color cup for working with large volumes of paint. 

  • The trigger is dual-action and provide spray width pattern at 20 mm (depend on distance between crown cap and object surface.

IWATA Custom Micron CM-B Version 2

Feature

  • The smallest nozzle and needle combination (0.18 mm) for the most precise and accurate control of detail spraying.

  • Features a 1.5 ml gravity-feed cup that cleans quickly for rapid color changes

  • A highly polished, hardened stainless-steel needle provides an exceptionally smooth transition from detail to mid-range spraying.

  • The trigger is dual-action and provide spray width pattern at 20 mm (depend on distance between crown cap and object surface.

IWATA Custom Micron CM-SB Version 2

Feature

  • The smallest nozzle and needle combination (0.18 mm) for the most precise and accurate control of detail spraying.

  • 3.8 ml side-feed cup which is engineered for right and left handed use and lets you view directly over the top of the airbrush for up-close, fine detail work.

  • For larger artwork, the Custom Micron versatility is enhanced by an optaional 7 ml side-feed cup, 14 ml gravity-feed cup or a 28 ml siphon bottle.

  • The trigger is dual-action and provide spray width pattern at 20 mm (depend on distance between crown cap and object surface.

Conclusion Table of Custom Micron Technical Data

Remark:

For CM-SB2 type, it can be used with gravity side cup and siphon container following as below;

Airbrush Gravity Side Cup HPA:

HPA Gravity Side Cup from left to right:

HPA-SB1: 1.8 ml

HPA-SB2: 7 ml

HPA-SB3: 14 ml

Gravity Side Cup for Airbrush

Bottle Container for large volume paint:

From left to right consist of 28 ml and 56 ml respectively.

Side Bottle container and siphon tube

Request

Quotation and Order

Back to
IWATA Airbrush

Products Division
กลุ่มสินค้า
After Sales Service
About R.O.M.
Social Network Channel
การบริการหลังการขาย
เกี่ยวกับ R.O.M.
Please click the title on above for short-cut way to each information page
โปรดคลิ๊กหัวข้อด้านบนสำหรับทางลัดไปยังข้อมูลต่าง ๆ ในแต่ละหน้า

© 2020 R.O.M. INTERTRADE Limited Partnership The Authorized WAGNER Group Product Distributor in Thailand since 1988.

© 2563 ห้างหุ้นส่วนจำกัด อาร์.โอ.เอ็ม. อินเตอร์เทรด ตัวแทนจำหน่ายสินค้าในเครือ WAGNER อย่างเป็นทางการในประเทศไทย ตั้งแต่ พ.ศ. 2531

 

สินค้าในเครือ WAGNER Group/Product under WAGNER Group

 

- WAGNER

- WALTHER PILOT

- TITAN

 

The ANEST IWATA official distributor for Thailand territory since 2016.

ผู้แทนจำหน่ายสินค้า ANEST IWATA อย่างเป็นทางการ ตั้งแต่ปี พ.ศ. 2559

The Hakko official distributor for Thailand territory since 2017

(Under Authorized Assigned by Bando Manufacturing Co.,Ltd)

ผู้จัดจำหน่ายสินค้า Hakko อย่างเป็นทางการในประเทศไทย ตั้งแต่ปี พ.ศ. 2560

(ภายใต้การแต่งตั้งตัวแทนจำหน่ายโดย บจก. แบนโด แมนูแฟคเจอริ่ง)

Distributor of Spray Equipment for Industry Factory, Car Refinish, Construction Project, Consumer Level and Arts

ผู้จำหน่ายอุปกรณ์พ่นสีสำหรับโรงงานอุตสหกรรม, งานพ่นสีในอู่รถยนต์, งานก่อสร้าง งานระดับครัวเรือนและงานศิลปะ