Powder Manaul Booth

Powder Manual Booth

ไทย

The WAGNER manual booths not only offer an introduction to the powder coating but may also be integrated into automated systems. The BASIC line offers two cost-efficient booth variants that customers may upgrade according to their requirements. Thanks to its numerous variants, the ID booth line may be employed for coating individual parts, for coating small volume productions and part of the powder coating system.

1. Flexibility

Here you find the right model for any coating requirements - be it for coating small or bulky parts.

2. Rapid Paint Change

The comfortable handling of the workpieces in the easily accessible booth ensures efficient process steps.

3. Modern Booth Concept

Thanks to its compact design, the booth needs a relatively small installation surface. The booths include robust and scratch-resistant stainless steel floor tiles.

4. Easy and Safe Operation

From installation to step, the WAGNER manual booths offer the easiest operation of all functions, for example, ventilation and cleaning functions.

5. Energy efficiency

The booth offers energy saving recirculated-air operation, the exhaust air is returned to the working area. The integrated exhaust system provides a dust free working environment.

Basic 4000 Suspension Booth

Included items

Booth housing
Fan motor, not installed (must install by yourself)
Silencer hood, not installed (must install by yourself)
Two filter cartridges, not install (must install by yourself)

Order Code

Suspension booth basic 4000 left side: 3305080
Suspension booth basic 4000 right side: 3306210

The basic 4000 suspension booth is suitable for the coating of individual parts or small series and is equipped with the basic functions required for a cost-effective system. It meets the technical requirements specified by CE and ATEX.

Special advantages

Coating openning (W x H) 1,420 mm x 1,420 mm Small footprint
Optimal also for medium-sized to small parts. Integrated rotatable workpiece suspension hook.
Integrated suction unit with 4,000 m3/h. Ergonomic and fatigue-free working conditions through direct accessibility to workpiece.
Connection for overspray collection bag below housing

Basic 8000 Spray Wall

Included items

The back wall in 2 segments
Fan motor, not installed (must install by yourself)
3 Baffles, not installed (must install by yourself)
Silencer hood, not installed (must install by yourself)
3 filter cartridges, not install (must install by yourself)
Mounting material

Order Code

Suspension booth basic 8000 left side: 3301920
Suspension booth basic 8000 right side: 3306211

The Basic 8000 spray wall is suitable for the coating of large parts and is equipped with the basic functions required for a cost-effective system. It meets the technical requirements specified by CE and ATEX.

Special advantages

Suitable for integration in the manual conveyor system. Small space requirements
Slanted air baffles for directing the air current. Parts are directly accessible
Compact size. Low workpiece height
Wide range of accessories

ID Transfer Booth

Included items

Booth housing accessories
3 Filter cartridges
Deflector grid

Order Code

ID Run-Through Booth 3.5 M Spray to recovery unit. Item Code 3063837
ID Run-Through Booth 2.5 M Spray to recovery unit. Item Code 3056730
ID Run-Through Booth 3.5 M Spray to waste. Item Code 3056770

The ID transfer booth is specially designed for the coating of small and large series in flow line operation. Therefore, this booth has the space tunnel for conveyor belt which through out the tunnel and transfer small and large workpiece through our this space.

Special Advantages

Flow opening H = 1,530 mm x W = 500 mm. For workpieces up to H = 1,000 mm x B = 300 mm
Ceiling slots and inlet/outlet vestibules integrable in automatic coating systems with flow line operation
With stainless steel floor plate robust, scratch resistant floor
Booth on casters mobile

ID Suspension Booth

Included items

Booth housing accessories
3 Filter cartridges
Deflector grid

Order Code

ID suspension booth for circulation mode. Item code 3057190
ID suspension booth circul. Mode + tail. Item code 3082406
ID suspension booth spray-to-waste mode. Item code 3056720

The ID suspension booth is designed specifically for small series with multiple colors.

Special advantages

Spray opening 1,400 mm (W) x 1,530 mm (H). For workpieces up to 800 mm (W) x 1,200 mm (H)
Suspension hooks integrated into the roof. Reliable grounding of parts
Base frame with a stainless steel floor plate. Robust, scratch resistant floor
Booth on casters mobile