SuperCube Powder Plastic Booth
ไทย
Powder color change possible in less than 5 minutes!
Whether fully automatic powder coating or combined with pre-and/or after coating, SuperCube provides all the options. The optimal physics of the plastic sandwich construction ensures minimal powder adhesion to the walls and supports the best powder application onto the workpiece.
The ideal structural shape for powder coating
Compact, with no supporting frames and no pit excavation. Rectangular booth is shape-also suited for horizontal gun arrangement. No powder deposits on the floor-super fast booth cleaning. Economical use of material. SuperCube combines these benefits, and;
-
The option of pre-and after coating stands
-
Blow-out devices for the integral booth floor. This keeps the floor clean and blows the powder into the extraction slot.
-
The floor of the booth can be walked on, facilitating cleaning and maintenance work.
-
Excellent illumination of the booth and manual coating stands thanks to booth lighting integrated into the roof.
-
Extraction of over-spray on both sides throughout the length of the booth. This creates a uniform airspeed and good coating.
-
High application effectiveness due to low booth floor and vertical airflow.
-
No powder deposits thanks to the optimization of the air flow in the extraction channels (Twister effect).
Blower Strip
Suction
Suction
Passivating electrode effect due to the sandwich construction
Plastic Booth
Electrode (-)
Workpiece
Ground
Fixed integral booth floor with blow-out device
Structure of SuperCube
Internal Structure of SuperCube
Less space required with higher performance and flexibility. The new SuperCube achieves the best utilization of space so far in the field of plastic booths. The result is a greater production capacity on a smaller area and with it a distinctly higher return on investment. Compact construction:
-
No pit required
-
The bottom edge of the workpiece from 900 mm
-
Low conveyor level
-
Optimizer the production run by avoiding gradients and minimizing work-piece spacing.
-
Space-saving pipe installation for powder recovery
The super fast color-changing concept
The modular construction of the peripheral systems. The WAGNER plastic booths allow all current system components to be combined. All components are replaceable and can be integrated 100% into the WAGNER Module concept.
Optimizing production
The decision on which booth is ideal for which requirement depends of course on the various individual requirements and processes. Thanks to the high level of flexibility and variability of the WAGNER system, it is possible to adapt them to suit all customer requirements.
Technical Data of SuperCube
Manual coating stands eliminate the need for an additional manual booth
When planning the powder booth, the hand coating stands should also be taken into account. This makes the booth versatile in use.
-
Manual coating stands possible at either end as an option
-
The manual coating stand at the end has a hinged wall which at the same time is used to shut off the flow line opening when changing the color
-
Manual coating stand also available with reversible stop (Opening left or right)
-
Each manual coating area has additional illumination
-
Gun holder integrated into the booth wall
Request
Quotation and Order
Back to
Automatic Powder Coating