Technical Data of After Filter

ไทย 

Thailand.png
1. After Filter Unit for ICM Booth (Co-Operate with Multi-Cyclone)

Included Items

 

  • Filter unit with a powder collecting container

  • Fan unit

  • Vent silencer not included

Final Filter is required to operate a cyclone system. They provide the necessary suction capacity and must be matched to the pressure loss in the overall system.

Special Advantage

 

  • Filter cartridges, application categories U,S,G,C meet the legal requirements for powder removal

  • Filter cleaning with compressed air pulses. Low air consumption.

  • Differential pressure monitor. Maintain the minimum suction capacity.

2. After Filter Unit for Mono-Cyclone

Included Items

 

  • Filter unit with powder collecting trolley

  • Fan unit

  • Vent silencer

  • The filter control unit (on the left or right side)

Final Filter is required to operate a cyclone system. They provide the necessary suction capacity and must be matched to the pressure loss in the overall system. This filter are built to use with Mono-Cyclone

Special Advantage

 

  • Filter cartridges, application categories U,S,G,C meet the legal requirements for powder removal

  • Filter cleaning with compressed air pulses. Low air consumption.

  • Differential pressure monitor. Maintain the minimum suction capacity.

3. ICF Filter Recovery

The filter is used to separate coating powders directly. It is characterized by a very high separation efficiency of over 99.90%. The ICF system can be flange-mounted directly onto the booth. The mobile filter trolley can be readily exchanged during a paint change.

Special Advantages

  • Compact set up with sieving unit and fluidized container. Less spare requirements, good cost/performance ratio.

3. Air Outlet Box for ICF Recovery Unit

The sound-insulated air outlet box collects the air that is sucked and blown out by the fans and returns it to the environment

Special Advantages

  • Flange-mounted directly onto the booth hull. Space-saving construction

Included items

 

  • Air outlet box

  • Sound insulation elements

4. Fan box for ICF Filter Recovery Unit

The fan box allows for a certain suction capacity of a booth. If the pressure loss in the air system is known, the expected airpower can be calculated on the basis of the fan characteristic curves. It is optimally coordinated with the ICF system.

Special Advantages

  • Flange-mounted directly onto the booth hull. Space-saving construction.

Included items

  • Fan box

  • Two air motors

  • Two radial fan wheel

  • Ten pulse cleaning valves

5. Filter Trolley for ICF Recovery Unit

The powder/air mixture sucked in the booth is separated in the filter trolley. The powder is captured in the ribs and is cleaned off by compressed air impulses. The recovered powder may thus be returned to circulation.

Special Advantages

  • Filter cartridges, application categories U,S,G,C meet the legal requirements for powder removal

  • Filter cleaning with compressed air pulses. Low air consumption.

  • Differential pressure monitor. Maintain the minimum suction capacity.

Included items

  • Filter box with insertion opening for powder container

  • Ten filter cartridges

Back to

Powder Recovery

Request

Quotation and Order

Products Division
กลุ่มสินค้า
After Sales Service
About R.O.M.
Social Network Channel
การบริการหลังการขาย
เกี่ยวกับ R.O.M.
Please click the title on above for short-cut way to each information page
โปรดคลิ๊กหัวข้อด้านบนสำหรับทางลัดไปยังข้อมูลต่าง ๆ ในแต่ละหน้า

© 2020 R.O.M. INTERTRADE Limited Partnership The Authorized WAGNER Group Product Distributor in Thailand since 1988.

© 2563 ห้างหุ้นส่วนจำกัด อาร์.โอ.เอ็ม. อินเตอร์เทรด ตัวแทนจำหน่ายสินค้าในเครือ WAGNER อย่างเป็นทางการในประเทศไทย ตั้งแต่ พ.ศ. 2531

 

สินค้าในเครือ WAGNER Group/Product under WAGNER Group

 

- WAGNER

- WALTHER PILOT

- TITAN

 

The ANEST IWATA official distributor for Thailand territory since 2016.

ผู้แทนจำหน่ายสินค้า ANEST IWATA อย่างเป็นทางการ ตั้งแต่ปี พ.ศ. 2559

The Hakko official distributor for Thailand territory since 2017

(Under Authorized Assigned by Bando Manufacturing Co.,Ltd)

ผู้จัดจำหน่ายสินค้า Hakko อย่างเป็นทางการในประเทศไทย ตั้งแต่ปี พ.ศ. 2560

(ภายใต้การแต่งตั้งตัวแทนจำหน่ายโดย บจก. แบนโด แมนูแฟคเจอริ่ง)

Distributor of Spray Equipment for Industry Factory, Car Refinish, Construction Project, Consumer Level and Arts

ผู้จำหน่ายอุปกรณ์พ่นสีสำหรับโรงงานอุตสหกรรม, งานพ่นสีในอู่รถยนต์, งานก่อสร้าง งานระดับครัวเรือนและงานศิลปะ