top of page

เปลี่ยนภาษา/Language Switch

Liquid Transfer Hose for Paint spraying and Solvent Transfer work

HAKKO paint hose is designed for any brand of manual spraying equipment. Whatever you use ANEST IWATA or WAGNER, 3 types of HAKKO paint hose can be applied without problem and the hose material are separated into nylon and fluorine that it is suitable for water-based paint and solvent-based paint. They have special feature for ground wire (Only in E-SV and E-PFFG) in order to prevent the static.

Basically, it is built for manual spraying equipment but it can be applied for liquid transfer application so the hose size of inner and outer always more than 1 size for liquid transfer work of industry.

HAKKO E-PFN: Nylon Hose for General Paint Spraying Application

e-pfn01.png

Product Feature

    - Solvent Resistance
    - Easy to Cut
    - Flexibility

Fluid Applicable

    - Solvent
    - Paint
    - Chemical

2 layers paint hose is built from polyamide or nylon material for inner layer that it can resist the paint solvent and thinner and polyurethane for outer layer for durable and flexible with reinforce yarn which enhance the duration. It is suitable for solvent-based paint spraying but you can also use with water-based paint but the duration may be shorter than water-based paint hose.

For more details of technical data, please click at “TECHNICAL DATA E-PFN” to see more details of hose size, temperature resistant and testing data.

Related Information of HAKKO E-PFN

The related information of E-PFN include soaking test report, video link for flexibility demonstration of E-PFN and table of chemical resistant.

For those of information, please click at “DETAILS” of each topic to see each of details

flat-2126876_1280.png
Soaking Test Report
camera-2008489_1280.png
Demo Video
bubble-2022490_1280.png
CHM. Resistant Table

HAKKO E-SV: Nylon Hose with ground wire for paint spraying and solvent

e-sv01.png

Product Feature

    - Ground Wire
    - Remove Static Electricity
    - Solvent Resistance

Fluid Applicable

    - Solvent
    - Paint
    - Chemical

3 Layers hose which is designed based on E-PFN but adding the third outer layers with conductive polyurethane. The black strip on surface is ground wire for prevention of static during spraying application or liquid transfer work in system. As this feature, this hose is suitable for manual electrostatic spray gun and they have bigger size for liquid transfer work that system require anti static hose.

For more details of technical data, please click at “TECHNICAL DATA E-SV” to see more details of hose size, temperature resistant and testing data.

Related Information of HAKKO E-SV

The related information of E-SV include soaking test report, video link for flexibility demonstration of E-SV and table of chemical resistant.

For those of information, please click at “DETAILS” of each topic to see each of details

flat-2126876_1280.png
Soaking Test Report
camera-2008489_1280.png
Demo Video
bubble-2022490_1280.png
CHM. Resistant Table

HAKKO E-PFFG: Fluorine ETFE Hose with ground wire for water-based paint

e-pffg01.png

Product Feature

    - Ground Wire
    - Remove static electricity
    - Water-Based Paint

Fluid Applicable

    - Solvent
    - Water-Based
    - Chemical

The 1st layer is ETFE material and combine with 2nd layer polyamide (Nylone) elastomer that these 2 material enhance the capability of transfer for thick mass liquid like water-based paint with full performance. Then combine with 3rd layer the polyurethane material which make hose to be durable and flexible and end up with 4th layer as conductive polyurethane. Therefore, E-PFFG can be applied with water-based paint and prevent the static.

For more details of technical data, please click at “TECHNICAL DATA E-PFFG” to see more details of hose size, temperature resistant and testing data.

Related Information of HAKKO E-PFFG

The related information of E-PFFG include soaking test report, video link for flexibility demonstration of E-PFFG and table of chemical resistant.

For those of information, please click at “DETAILS” of each topic to see each of details

flat-2126876_1280.png
Soaking Test Report
camera-2008489_1280.png
Demo Video
bubble-2022490_1280.png
CHM. Resistant Table

Contact Info for price inquiry or order

HAKKO Paint Hose and Solvent Hose

Paint and solvent transfer hose from HAKKO that it is high flexible hose and be available for spraying application and liquid transfer work with full performance. E-PFN for ordinary paint, E-SV with ground wire hose feature for paint transfer and E-PFFG for water-based paint or high-dense liquid with ground wire.

R.O.M. INTERTRADE
TEL: 02-322-2495
LINE ID: @romcoating
E-Mail: rom@romltd.com
Website: www.romltd.com

bottom of page