HAKKO Fitting for liquid hose and air hose
Fitting of HAKKO is designed specially for paint hose E-PFN E-SV E-PFFG and air hose E-AFC that those of paint hose is applied for manual spraying equipment. The general connector size are G1/4 and G3/8 which is the regular size that you may find on famous spraying equipment brand such as ANEST IWATA and WAGNER.
Even the HAKKO hose size is quite similar to other hose and you can use any fitting from everywhere but using original fitting from HAKKO can connect with hose at 100% of performance and guarantee to prevent the paint or air leakage from hose.
HAKKO E-FB and E-FS: Fitting for Liquid and Air Hose
Hose Applicable
- - E-AFC-6.5
- E-AFC-8.9
- E-PFN-6.5
- E-PFN-8.9
- E-SV-6.5
- E-PFFG-6.5
This HAKKO fitting is designed for hose size 6.5 x 8.9 mm and 8.9 x 12.1 mm. It is separated into 4 types. G1/4 connector size for inner hose 6.5 mm and 8.9 mm and G3/8 connector size for inner hose 6.5 mm and 8.9 mm.
In other hand, it is separated into 2 material types. If the material fitting is brass nickel which is regular model, it is E-FB series but if the 304 stainless material, it is identified as E-FS series.
For further information, please click at “TECHNICAL DATA E-F” that it include a details of connector size and installation procedure.
Related Information of HAKKO E-FB and E-FS
Main information include demonstration video and chemical resistant table that both of fitting types are built with material shown in table column which are following as below;
304 Steel Use Stainless (E-FS)
Brass (E-FB)
For more information, please click at “DETAILS” in each title.
Demo Video
CHM. Resistant Table
HAKKO E-FBG and E-FSG: Fitting with Spring Guide for Liquid and Air Hose
Hose Applicable
- - E-AFC-6.5
- E-AFC-8.9
- E-PFN-6.5
- E-PFN-8.9
- E-SV-6.5
- E-PFFG-6.5
This fitting is designed from basic structure of E-FB and E-FS but there have few different in shape due it must be connected with spring hose guide at fitting end. Spring hose guide help to prevent the bending and kink in order to avoid the damage. Therefore, it is suitable for manual spray equipment.
This fitting is separated into 2 materials. Brass nickel version is E-FBG and 304 stainless version is E-FSG.
For further information, please click at “TECHNICAL DATA E-FG” that it include a details of connector size and installation procedure.
Related Information of HAKKO E-FBG and E-FSG
Main information include demonstration video and chemical resistant table that both of fitting types are built with material shown in table column which are following as below;
304 Steel Use Stainless (E-FSG)
Brass (E-FBG)
For more information, please click at “DETAILS” in each title.
Demo Video
CHM. Resistant Table
HAKKO E-EM: Fitting for solvent transfer hose
Hose Applicable
- - E-SV-7
- E-SV-9
E-SV is designed specially for solvent transfer work before they built E-SV-6.5 for painting application later. Therefore, E-EM fitting is the special connector for E-SV-7 and E-SV-9 which is the special hose size unlike other hose.
Even the primary liquid transfer is solvent but E-EM fitting is available both brass nickel version and 304 stainless version.
For further information, please click at “TECHNICAL DATA E-EM” that it include a details of connector size and installation procedure.
Related Information of HAKKO E-EM
Main information include demonstration video and chemical resistant table that E-EM fitting is built with material shown in table column which are following as below;
304 Steel Use Stainless
Brass
For more information, please click at “DETAILS” in each title.
Demo Video
CHM. Resistant Table
Contact Info for price inquiry or order
HAKKO Fitting for paint hose and air hose
HAKKO Fitting for paint hose solvent hose and air hose. There have 2 material types such as brass nickel and 304 stainless.
R.O.M. INTERTRADE
TEL: 02-322-2495
LINE ID: @romcoating
E-Mail: rom@romltd.com
Website: www.romltd.com